AP900 Pro RT Li-ion model 1 - 3 kVA

+ High frequency on-line double conversion technology

+ DSP (Digital signal processors) control technology

+ Active power factor correction (APFC), input power factor up to 0.99

+ Output power factor 0.9

+ Wide input voltage range (110 ~ 300 Vac) and frequency range (40 ~ 70Hz)

+ Auto sensing frequency

+ 50/60Hz frequency conversion

+ Cold start

+ Effective software and hardware protection

+ Linear derating in low voltage input reducing battery discharging times

+ Fan speed varies intelligently with temperature, reducing noise and extending its service life

+ Settable delayed start when power is restored

+ Use lithium battery

● High reliability, high power and energy density

● Providing greater autonomy (15 min at full load for standard model UPS)

● Long cycle life (≥ 2000 cycle times)

● Greater performance at high/low temperature

+ Advanced battery management (ABM)

+ Rotatable display panel

+ Multi-platform communications: RS232 (standard), USB/RS485/SNMP/dry contacts (optional)

Available Options

+ Optional USB,RS485 card,AS400 dry contacts, SNMP card, SMS alarms, EPO function, MBS (External maintenance bypass switch)

MODEL	AP901PSRT	AP901PHRT	AP902PSRT	AP902PHRT	AP903PSRT	AP903PHRT
Capacity	1 kVA / 900 W		2 kVA / 1800 W		3 kVA / 2700 W
INPUT
Rated voltage	208 / 220 / 230 / 240 Vac
Voltage range	110 ~ 176 Vac (linear derating between 50% and 100% load); 176 ~ 280 Vac (no derating); 280 ~ 300 Vac (derating 50%)
Frequency	40 ~ 70 Hz (auto-sensing)
Power factor	≥ 0.99
Bypass voltage range	-25% ~ +15% (settable)
Total harmonic distortion (THDi)	≤ 6%
OUTPUT
Voltage	208 / 220 / 230 / 240 Vac (settable via LCD)
Voltage regulation	± 1%
Frequency	45 ~ 55 Hz or 55 ~ 65 Hz (synchronized range); 50 / 60 Hz ± 0.1 Hz (battery mode)
Waveform	Sinusoidal
Power factor	0.9
Total harmonic distortion (THDv)	≤ 2% (linear load); ≤ 5% (non-linear load)
Crest factor	3:1
Overload	105% ~ 125%for 1 min,125% ~ 150% for 30s, > 150% for 300 ms
BATTERIES
Battery type	Lithium iron phosphate Battery
DC voltage	25.6 V	48 V	51.2 V	48 V	76.8 V	48 V
Inbuilt battery	8 × 3.2 V/12 Ah	/	16 × 3.2 V/12 Ah	/	24 × 3.2 V/12 Ah	/
Charging current (max.)	1 A	6 A	1 A	6 A	1 A	6 A
Recharger time	Standard model: 90% capacity restored in 11 hours; Long time model: depend on the capacity of battery
SYSTEM
Efficiency	≥ 90% (Mains mode)		≥ 91% (Mains mode)		≥ 92% (Mains mode)
	≥ 85% (Battery mode)		≥ 86% (Battery mode)		≥ 87% (Battery mode)
	≥ 95% (ECO mode)		≥ 96% (ECO mode)		≥ 97% (ECO mode)
Transfer time	Mains mode to battery mode: 0 ms Inverter mode to bypass mode: 4 ms (typical)
Protections	Short-circuit, overload, overtemperature, battery discharge protection and fan testing protection
Communications	RS232 (standard), USB / RS485 / dry contacts / SNMP (optional)
Display	LCD + LED
Standards	EN 62040-1, EN 62040-2, EN 61000-3-2, EN 61000-3-3, IEC 61000-4-2, IEC 61000-4-3, IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-6, IEC 61000-4-8, IEC 61000-4-11, IEC 61000-2-2,IEC 62040-2, IEC 62040-1
OTHERS
Operating temperature	0℃ ~ 40℃
Storage temperature	-25°C ~ 55°C (without batteries)
Relative humidity	0~95% (non-condensing)
Altitude	≤ 1000 m, derating 1% for each additional 100 m
IP rating	IP 20
Noise levelat 1m	≤50dB
Dimensions (W × D × H) (mm)	440× 468×88		440 × 583 × 88	440 × 468 × 88	440 × 683 × 88	440 × 468 × 88
Packaged dimensions (W×D×H) (mm)	545 × 598 × 198		545 × 707 × 201	545 × 598 × 198	545 × 807 × 201	545 × 598 × 198
Net weight(kg)	10.6	7.6	19	9.7	25	10.6
Gross weight(kg)	13.6	10.6	23	14	29	14.6